Azuga Screws (5), AI Dash Cam

← All power cables and mounts

At a glance

What the shop says it is

The shop lists a set of five screws sized for the AI SafetyCam mounting points, for installation, maintenance or replacement. The price was $2.99 on 2026-10-21. It gives no thread size, length or head type, so do not buy them to fit anything other than this camera.

Why a pack of five

One camera does not need five screws. The pack covers the ones you drop. A screw in the footwell of a van is gone, and a camera held on by a screw from the wrong bin is a callback. Count how many the camera uses on your first install, write that number on the bag, and the next job starts with the right quantity. At this price, the sensible rule is that you never leave a customer vehicle one screw short.

How many to stock

These are our habits, not Azuga numbers. The shop does not say how many screws a camera uses.

The checks that catch a bad screw

• Match, then drive. Compare a screw to the one you are replacing before you thread it. A screw that fights you is the wrong one.
• Look at the head. A rounded or chewed head is a reason to swap it, not to try harder.
• Do not mix bins. Vehicle screws and camera screws look alike in a tray. Keep the camera ones in their bag.
• Recheck after a few weeks. Vibration loosens small screws on a work truck. Look at them at the next service.

When a loose screw looks like something else

A camera that shifts on its mount points down the road, or whose view slowly drifts, can be a loose screw and not a bad camera. Check this first, since it costs nothing and takes a minute. Azuga says misaligned lenses stop events from triggering on the newer cameras, and a shifted view is a good reason to look at the screws before you open a ticket. On the AI SafetyCam, the aiming screws are separate, so check both sets.

Keep the paperwork too

When you replace a screw, note it in the vehicle record along with the date. A fleet that can say what was touched has a faster answer when a camera comes back with a problem. It also helps when a customer asks who last had the camera apart, and when.

Where to go next

Questions we get

What size are the screws?

The shop does not say. Check the part against the camera before you order a quantity.

Do they fit the aux mounts?

Azuga does not say. The shop lists these for the camera mounting points.

Do I need them for an adhesive mount?

The adhesive mount needs no screws, per the shop. These are for the camera hardware itself.

Sources: Azuga shop product page, checked 2026-10-21, Azuga stand-alone camera guide, Azuga SafetyCam AI install guide. AZUGA is a trademark of its owner. API Signal is an independent installer and is not Azuga.