The GO Focus Pro is the top of Geotab's dash cam line: a dual-lens AI dash cam that anchors up to five auxiliary cameras for full coverage around larger vehicles, with traffic light and plate recognition built in.

The GO Focus Pro is a windshield-mounted AI dash cam that acts as the hub for a system of auxiliary cameras. On its own it records the road and the cabin in 1080p. Add side, rear and driver monitoring cameras and it becomes a 360-degree view of a vehicle, a job the smaller Focus models were not built for.
Unlike the GO Focus, which draws power through the IOX port, the Pro is wired to the vehicle with a three-wire power harness. It still pairs automatically with a GO9 or newer device when an IOX harness links the two, and it calibrates itself, so nobody has to measure mounting height or vertical offset. It comes in a dual-lens version and a Road-Only version.
Box trucks and beverage or food distribution. Docking, backing into alleys and loading in cramped lots is where these trucks collect most damage. Side and rear cameras plus the in-cab monitor target exactly those low-speed hits.
Refuse and roll-off haulers. External auxiliary cameras rated IP69K are built to survive pressure washing and weather, and blind-spot detection helps on residential routes full of pedestrians and parked cars.
Transit and school transportation. Large passenger vehicles benefit from the surround view and the driver monitoring camera, which Geotab offers for cabins with unusual layouts or mounting obstructions.
Construction and utility trucks. Bucket trucks and dump trucks on job sites get side coverage, and surround footage speeds up claims when something is struck.
| Spec | Detail |
|---|---|
| Main lenses | Dual: 1080p road and 1080p cabin with 940 nm IR. Road-Only: 1080p road |
| Field of view | 143° diagonal / 120° horizontal / 64° vertical |
| Auxiliary cameras | Up to five, including IP69K USB and TVI external options |
| Storage | 128 GB microSDXC included; 512 GB and 1 TB options; two slots, 2 TB maximum; Geotab cards only |
| Cellular | LTE CAT 4, data plan included |
| Wireless | Wi-Fi 802.11 a/b/g/n/ac (2.4 and 5 GHz), Bluetooth 5.0 with BLE |
| Power | 12V/24V; 6 W nominal; parking mode 50 mA and deep sleep 7 mA at 12V |
| Power management | Ignition (ACC) sensing and 10 F supercapacitor; ICE and EV powertrains |
| Encryption | AES-256 in transit and at rest |
| Dimensions, weight | Dual: 124 x 88.6 x 101 mm, 340 g. Road-Only: 124 x 88.6 x 72 mm, 300 g |
| Operating temperature | -20 °C to +60 °C (up to +70 °C under certain conditions) |
| IP rating (main unit) | IP30 |
| Warranty | 3 years |
The Pro's harness is the detail that trips people up. Geotab's guide maps it as red to ACC, yellow to constant B+ and black to ground, which is not the color logic many technicians expect, so confirm each fuse slot with a multimeter before tapping. Geotab's sequence has the dash cam powered temporarily on fuse taps first, activated by scanning the box serial in the Geotab Video app, and positioned using the app's live view before the adhesive comes off. Check that the lowered sun visor does not cover the cabin lens. The same glass temperature window applies as other Focus models, 70°F to 100°F. After aiming the road lens at the horizon and the cabin lens at the seated driver, the bracket gets a second 30-second press, the harness runs behind the headliner and A-pillar, and the permanent fuse tap connections are made behind the fuse panel.
The GO Focus Pro fits vehicles where the driver cannot see everything from the seat: straight trucks, buses, refuse units and anything that backs up for a living.
A small fleet of pickups or cargo vans usually does not need five auxiliary cameras. Those vehicles are typically better matched to the GO Focus Plus for driver coaching, or the GO Focus for road-only evidence, at a lower hardware and labor cost.
No. Geotab supports only its own provided cards in the Pro. We supply the larger 512 GB and 1 TB Geotab cards, and the second slot doubles capacity.
No. The main unit works by itself, and auxiliary cameras are added where a vehicle needs them, such as a single rear camera on a van or full side coverage on a large truck.
Geotab ties auto-pairing and Blind Spot Warning to a GO9 or newer device. On older GO hardware, we plan the device upgrade into the same visit as the dash cam.
We provide the GO Focus Pro and every auxiliary camera it needs, then wire the full system on site at your yard. Call us at 803-513-1009 or request pricing through Get a Quote.
Sources: Geotab Support: GO Focus Pro technical specifications, Geotab Support: GO Focus Pro overview, Geotab Install Guides: GO Focus Pro, Geotab: GO Focus Pro product page. GEOTAB is a registered trademark of Geotab Inc. API Signal is an independent installer and is not Geotab.
Tell us how many vehicles and what they are. We'll quote the hardware and the install together.