Which wires give constant, ignition and ground on a 2024 Mitsubishi Outlander?
On a 2024 Mitsubishi Outlander, take constant power from the Green wire at the OBD-II port, pin 16, ignition from the interior fuse panel (wire color not published), and ground to the Black wire at the OBD-II port, pin 4. Meter every wire first.
Meter every wire before you tap it. Colors change with trim and build date.
OBD-II port:Under the dash, driver sideBest power spot:OBD-II portSystem voltage:12VIgnition type:Push-to-start (this page)
Where do I get constant, ignition and ground on a 2024 Mitsubishi Outlander?
Constant and ground are at the OBD-II port. Ignition comes from a fuse tap.
Option 1 Constant and ground
OBD-II port
Under the dash, driver side.
Constant
Green
OBD-II port, pin 1612V battery feed. Fuse it close to the tap.
Ground
Black
OBD-II port, pin 4Ground.
Never tap the push-to-start wires.
Option 2 Ignition
Fuse tap
No ignition wire in the guide.
Ignition
Fuse tap
Interior fuse panelThe guide shows no ignition wire. Use a slot that is dead off and hot on.
Accessory
Fuse tap
Interior fuse panelNo accessory wire in the guide. Meter a slot first.
Use an add-a-fuse.
From Fortin's install guides for the 2022 to 2024 Outlander with push-to-start (guides 103761 and 116951).
Where are the turn signal, reverse and light wires on a 2024 Mitsubishi Outlander for advanced 360 multicam and video telematics installs?
Circuit
Wire color
Location and what it does
Left turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Right turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Park lightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
HeadlightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
ReverseNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Dome lightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Each chip shows the main insulation color with its stripe. Source: Fortin's install guides for the 2022 to 2024 Outlander with push-to-start (guides 103761 and 116951).
Where are the brake, door, speed and CAN wires on a 2024 Mitsubishi Outlander for advanced 360 multicam and video telematics installs?
Circuit
Wire color
Location and what it does
CAN dataDataNot yet checked
Lavender/Blue (high)
Lavender/Pink (low)
Grey 40-pin plug on the BCM, left of the steering columnFortin says do not solder these connections. Never cut or splice them.
DoorsNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
BrakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Parking brakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Vehicle speedNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Source: Fortin's install guides for the 2022 to 2024 Outlander with push-to-start (guides 103761 and 116951). Wires marked Not found were not in the guides.
Where are the fuse boxes and ground points on a 2024 Mitsubishi Outlander?
Driver dashOBD-II portConstant and ground.
Interior fuse panelFuse tapIgnition.
Ground pointsBlack wire or body metalNever the battery negative post.
Locations from Fortin's install guides.
Where is the OBD-II port on a 2024 Mitsubishi Outlander?
OBD II
Diagnostic portOBD-II port: under the dash, driver sidePlug-in GPS trackers and OBD harnesses connect here. Check the port before you plan the install.
Which years share wiring with the 2024 Mitsubishi Outlander?
This page2024Mitsubishi Outlander, push-to-start.
Same wiring2022, 2023Same wiring in both Fortin guides.
Older Outlander2020 and olderPrevious body. Different wiring. 2021 is not covered yet.
★
Help build this pageWant to be famous?Share a wire color, a photo or a tip for this vehicle, and your name goes on this page.
Add yoursClose▾
This page covers the 2024 Mitsubishi Outlander SUV with push-to-start.
The wire colors come from Fortin's install guides, read wire by wire. Our own team has not yet metered these on a 2024 Outlander.
Written by API Signal, fleet GPS and camera installers for 35+ years across Georgia, South Carolina and North Carolina, installing every major telematics and camera brand. Every wire on this page lists its source.
Test every wire with a meter before you tap it
No wiring information is ever guaranteed. Colors and locations change with trim, options and build date, and the manufacturer can change them in the middle of a model year. We share this as a starting point for installers, and you are responsible for confirming every connection on the vehicle in front of you.
Common questions about 2024 Mitsubishi Outlander wiring
What wire is constant power on a 2024 Mitsubishi Outlander?
Green at the OBD-II port, pin 16. 12V battery feed. Meter it before you tap it.
Which years share wiring with the 2024 Mitsubishi Outlander?
2022, 2023. Same wiring in both Fortin guides.
Help build this page
Had the panels off on one of these? Show the next installer what you found.
No one has sent photos for the 2024 Mitsubishi Outlander yet, so yours could be the first. Every photo, wire color and tip we use goes on this page with your name on it, and it saves the next installer time under the dash.
1. Snap it
The plugs, tap points, fuse boxes and ground points. Phone photos are fine.
2. Send it
Tap "Add yours" at the top of this page. Your tip and your photos go in the same box.
3. See your name on it
We check every tip, then post it here "Compliments of" you, by name.
Compliments of
The installers who helped build this page.
★
Founding contributor spot: openThe first installer to confirm a wire or send photos for the 2024 Mitsubishi Outlander gets their name here, and it stays here.
★
Every tip we use gets a creditThe wire you checked is marked "Checked on a vehicle, compliments of" you.
Want to be famous?
Your name, right on this page, for everyone who uses it to see. Add your tip and your photos in one box.
