Which wires give constant, ignition and ground on a 2024 Chevrolet Traverse?
On a 2024 Chevrolet Traverse, take constant power from the Red/White wire at the body control module at the center console, passenger side, and ground to the Black wire at the body control module at the center console, passenger side. Meter every wire first.
Meter every wire before you tap it. Colors change with trim and build date.
OBD-II port:Location not confirmedBest power spot:Body control module, center console, passenger sideSystem voltage:12VIgnition type:Push-button (this page)
Where do I get constant, ignition and ground on a 2024 Chevrolet Traverse?
Constant and ground are at the body control module at the center console, passenger side. No ignition wire color is printed for this push-to-start vehicle.
Option 1 Constant and ground
Body control module
At the center console, passenger side. Plugs X2 (pink), X4 (gray), X5 (green) and X8 (dark gray).
Constant
Red/White
Body control module at the center console, passenger sideAlways hot, 12V.
Ground
Black
Body control module at the center console, passenger sideGround at the same module.
Ignition
Not found
Not foundFortin reads ignition over the data bus on this vehicle, so no ignition wire color is printed. Use a fuse tap for switched power.
Colors from Fortin. The guide does not say which plug or pin each wire is in, so find the color and meter it.
Option 2 Ignition
Fuse tap
For switched power.
Ignition
Fuse tap
Interior fuse panelNo fuse position was found in a source for these years. Meter the slots with the vehicle off, then on, and use an add-a-fuse tap.
Ground
Body ground
Body metal under the dashClean, bare metal only. Never the battery negative post.
Pick a slot that is dead with the vehicle off and hot with it on.
From Fortin's install guide for the 2024 Traverse with push-to-start (Fortin lists it for 2024 and 2025).
Where are the turn signal, reverse and light wires on a 2024 Chevrolet Traverse for advanced 360 multicam and video telematics installs?
Circuit
Wire color
Location and what it does
Left turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Right turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Park lightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
HeadlightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
ReverseNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Dome lightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Each chip shows the main insulation color with its stripe. Source: Fortin's install guide for the 2024 Traverse with push-to-start (Fortin lists it for 2024 and 2025).
Where are the brake, door, speed and CAN wires on a 2024 Chevrolet Traverse for advanced 360 multicam and video telematics installs?
Circuit
Wire color
Location and what it does
BrakeDataNot yet checked
Blue/Yellow
Body control module at the center console, passenger sideFortin marks this as a multiplexed (MUX) brake signal, not a plain 12V brake wire. Do not use it as a 12V sense input.
HazardNegative -Not yet checked
Green/White
Body control module at the center console, passenger sideNegative trigger for the hazard lights. The horn wire is also Green/White, so go by plug and pin.
HornNegative -Not yet checked
Green/White
Body control module at the center console, passenger sideNegative horn trigger. Same color as the hazard wire.
Door lockDataNot yet checked
Green/Yellow
Body control module at the center console, passenger sideFortin marks this as a data wire for the door locks.
Push-button startDataNot yet checked
Blue/Green
Body control module at the center console, passenger sideMultiplexed start button signal. Never tap it.
DoorsNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Parking brakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Vehicle speedNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
CAN dataDataNot yet checked
Blue/Green (high)
White/Green (low)
Body control module at the center console, passenger sideCAN bus 1. Blue/Green is also the start button color here, so go by plug and pin. Never cut or splice the CAN wires.
Source: Fortin's install guide for the 2024 Traverse with push-to-start (Fortin lists it for 2024 and 2025). Ignition, turn, park, reverse, headlight, dome, door pin, parking brake and speed wires were not found.
Where are the fuse boxes and ground points on a 2024 Chevrolet Traverse?
InteriorFuse panelNo fuse position for these years was found in a source. Read the lid label and meter the slot.
Body moduleCenter console, passenger sidePlugs X2 (pink), X4 (gray), X5 (green) and X8 (dark gray), per Fortin.
Ground pointsBlack wire at the body moduleOr clean body metal. Never the battery negative post.
Locations from Fortin's install guide.
Where is the OBD-II port on a 2024 Chevrolet Traverse?
OBD II
Diagnostic portOBD-II port: location not confirmedLook under the driver side dash first, and send us a photo if you find it.
Which years share wiring with the 2024 Chevrolet Traverse?
This page2024Traverse with push-button start, new body.
Same wiring2025Fortin lists one guide for the 2024 and 2025 Traverse.
Not this page2023 and olderThe 2024 Traverse is a new body with different wiring.
★
Help build this pageWant to be famous?Share a wire color, a photo or a tip for this truck, and your name goes on this page.
Add yoursClose▾
This page covers the 2024 Chevrolet Traverse with push-button start, the first year of the new body.
The wire colors come from Fortin's install guide, read wire by wire. Fortin works this vehicle mostly over the data bus, so only a few plain wires are printed. Our own team has not yet metered these on a 2024 Traverse.
Written by API Signal, fleet GPS and camera installers for 35+ years across Georgia, South Carolina and North Carolina, installing every major telematics and camera brand. Every wire on this page lists its source.
Test every wire with a meter before you tap it
No wiring information is ever guaranteed. Colors and locations change with trim, options and build date, and the manufacturer can change them in the middle of a model year. We share this as a starting point for installers, and you are responsible for confirming every connection on the truck in front of you.
Common questions about 2024 Chevrolet Traverse wiring
What wire is constant power on a 2024 Chevrolet Traverse?
Red/White at the body control module at the center console, passenger side. Always hot, 12V. Meter it before you tap it.
Where is the brake wire on a 2024 Chevrolet Traverse?
Blue/Yellow at the body control module at the center console, passenger side. Fortin marks this as a multiplexed (MUX) brake signal, not a plain 12V brake wire. Meter it before you tap it.
Which years share wiring with the 2024 Chevrolet Traverse?
2025. Fortin lists one guide for the 2024 and 2025 Traverse.
Help build this page
Had the panels off on one of these? Show the next installer what you found.
No one has sent photos for the 2024 Chevrolet Traverse yet, so yours could be the first. Every photo, wire color and tip we use goes on this page with your name on it, and it saves the next installer time under the dash.
1. Snap it
The plugs, tap points, fuse boxes and ground points. Phone photos are fine.
2. Send it
Tap "Add yours" at the top of this page. Your tip and your photos go in the same box.
3. See your name on it
We check every tip, then post it here "Compliments of" you, by name.
Compliments of
The installers who helped build this page.
★
Founding contributor spot: openThe first installer to confirm a wire or send photos for the 2024 Chevrolet Traverse gets their name here, and it stays here.
★
Every tip we use gets a creditThe wire you checked is marked "Checked on a truck, compliments of" you.
Want to be famous?
Your name, right on this page, for everyone who uses it to see. Add your tip and your photos in one box.
