Midsize sedan, gas and hybrid. Key or push-button start.
★
Help build this pageWant to be famous?Share a wire color, a photo or a tip for this truck, and your name goes on this page.
Add yoursClose▾
Which wires give constant, ignition and ground on a 2014 Toyota Camry?
On a 2014 Toyota Camry, take constant power from the Green wire at the ignition switch, white 8-pin plug, pin 5, ignition from the Black wire at the ignition switch, white 8-pin plug, pin 6, and ground to clean, bare body metal. Meter every wire first.
Written by API Signal, fleet GPS and camera installers for 35+ years across Georgia, South Carolina and North Carolina, installing every major telematics and camera brand. Every wire on this page lists its source.
Test every wire with a meter before you tap it
No wiring information is ever guaranteed. Colors and locations change with trim, options and build date, and the manufacturer can change them in the middle of a model year. We share this as a starting point for installers, and you are responsible for confirming every connection on the truck in front of you.
This page covers the 2014 Toyota Camry, gas and hybrid.
It came with a key or push-button start depending on trim; hybrids are push-button. A wire sheet exists for this year. Our own team has not yet metered these on a 2014 car, and each row says so.
OBD-II portUnder the driver dash
Best power spotIgnition switch plug
System voltage12V
Ignition typeKey or push-button
Need More Installs?
We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.
Where do I get constant, ignition and ground on a 2014 Toyota Camry?
Take constant, ignition and ground from the same area.
Option 1 Key start
Ignition switch (key start)
Steering column, white 8-pin plug.
Constant
Green
Ignition switch, white 8-pin plug, pin 5Always hot, 30A. Key-start cars. A second constant is Yellow (7.5A) on pin 4. The 2012 table gives White at the dash fuse box 1-pin plug instead.
Ignition
Black
Ignition switch, white 8-pin plug, pin 6Hot in run. The 2012, 2014 and 2015 to 2016 sheets agree. A second ignition is Pink on pin 1.
Ground
Body ground
Body metal under the dashClean, bare metal only. Never the battery negative post.
Accessory
White
Ignition switch, white 8-pin plug, pin 2Hot in accessory and run.
The starter is Blue on pin 7 (Light Green on pin 3 is the second starter). Never tap the starter.
Option 2 Push-button
OBD port and steering lock (push start)
Smart key cars and every hybrid.
Constant
Red
OBD port, pin 16Always hot. Push-start cars, from Directed.
Ignition
Light Green
Steering lock plug, black 7-pin, pin 6Hot in run. Push-start cars, gas and hybrid, from iDatalink.
Ground
Body ground
Body metal under the dashClean, bare metal only. Never the battery negative post.
The start button wire is Purple on the button black 10-pin, pin 1. Never tap it.
Key-start colors from Camry wire sheets on the12volt for 2012, 2014 and 2015 to 2016. Push-start colors from the iDatalink and Directed guides for 2012 to 2017 push-start Camrys.
What are the turn signal, reverse and light wires on a 2014 Toyota Camry?
Circuit
Wire color
Location and what it does
Left turnPositive +Not yet checked
Yellow
Dash fuse box, white 36-pin plug (3C), pin 22Flashes with the left signal. All sheets agree. Front and rear are not listed separately.
Right turnPositive +Not yet checked
Green
Dash fuse box, white 36-pin plug (3C), pin 19Flashes with the right signal.
Park lightPositive +Not yet checked
Pink
Dash fuse box, white 36-pin plug (3C), pin 5Park lamp output. The switch input is Black (negative) at the Body ECU white 30-pin, pin 30; the 2012 table says White.
HeadlightNegative -Not yet checked
Pink
Body ECU on the dash fuse box, white 30-pin plug, pin 29Headlight switch input, from the 2014 and 2015 to 2016 sheets.
ReversePositive +Not yet checked
Pink
Dash fuse box, white 36-pin plug (3C), pin 7Hot in reverse. Pink is also the park light on pin 5, so go by pin.
Each chip shows the main insulation color with its stripe. Source: Camry wire sheets on the12volt for 2012, 2014 and 2015 to 2016 and the iDatalink and Directed guides for 2012 to 2017 push-start Camrys.
Where are the brake, door, speed and CAN wires on a 2014 Toyota Camry?
Circuit
Wire color
Location and what it does
BrakePositive +Not yet checked
Red
Brake switch, white 4-pin plug, pin 1Hot with the pedal pressed.
DoorsNegative -Not yet checked
Blue (driver)
Light Blue (passenger)
Pink (left rear)
Black (right rear)
Dash fuse box 3C pin 15 (driver); Body ECU white 30-pin pins 19, 1 and 6Each grounds when its door is open.
TrunkNegative -Not yet checked
White
Dash fuse box, white 36-pin plug (3C), pin 9Grounds with the trunk open.
Parking brakeNegative -Not yet checked
Yellow
Dash fuse box, white 40-pin plug (3D), pin 20Grounds with the parking brake set.
HazardNegative -Not yet checked
White
A/C control, black 16-pin plug, pin 4Hazard switch input.
Vehicle speedAC signalNot yet checked
Blue
Purple
Driver kick blue 26-pin, pin 21; or radio white 28-pin, pin 17Speed signal, from the 2014 and 2015 to 2016 sheets.
TachAC signalNot yet checked
Green
OBD port, pin 9Engine speed signal.
CAN busDataNot yet checked
Blue (high)
White (low)
OBD port, pins 6 and 14Never cut or splice them.
Sources: Camry wire sheets on the12volt for 2012, 2014 and 2015 to 2016 (installer-reported), the iDatalink and Directed guides for 2012 to 2017 push-start Camrys, and Toyota's owner's manual and hybrid emergency guide. Seatbelt, park/neutral and the third brake light were not found.
Which years share wiring with the 2014 Toyota Camry?
This page2014Sheet for this year.
Same wiring2012, 2013, 2015, 2016 and 2017iDatalink treats 2012 to 2017 push-start Camrys, gas and hybrid, as one chart, and the key-start sheets for 2012, 2014 and 2015 to 2016 agree on ignition.
Where are the fuse boxes and ground points on a 2014 Toyota Camry?
InteriorUnder the instrument panelECU-IG1 NO.1 and NO.2 (10A) and PANEL (10A) are listed in the owner's manual.
Under the hoodEngine compartment fuse boxPush the tabs in and lift the lid off.
BatteryEngine bay (gas) or trunk (hybrid)The hybrid 12V battery is in the trunk, passenger side rear quarter well.
Ground pointsClean body metalNo named ground point found. Never the battery negative post.
Fuse and battery locations from Toyota's owner's manuals. Our team has not yet checked them on a car.
Where is the OBD-II port on a 2014 Toyota Camry?
OBD II
Diagnostic portOBD-II port: under the driver dashPlug-in GPS trackers and OBD harnesses connect here. Check the port before you plan the install.
Common questions about 2014 Toyota Camry wiring
What wire is constant power on a 2014 Toyota Camry?
Green at the ignition switch, white 8-pin plug, pin 5. Always hot, 30A. Meter it before you tap it.
What wire is ignition on a 2014 Toyota Camry?
Black at the ignition switch, white 8-pin plug, pin 6. Hot in run. Meter it before you tap it.
Where is the reverse wire on a 2014 Toyota Camry?
Pink (positive +) at the dash fuse box, white 36-pin plug (3C), pin 7. Hot in reverse. Meter it before you tap it.
Where is the brake wire on a 2014 Toyota Camry?
Red (positive +) at the brake switch, white 4-pin plug, pin 1. Hot with the pedal pressed. Meter it before you tap it.
Where is the parking brake wire on a 2014 Toyota Camry?
Yellow (negative -) at the dash fuse box, white 40-pin plug (3D), pin 20. Grounds with the parking brake set. Meter it before you tap it.
Where is the vehicle speed signal on a 2014 Toyota Camry?
Blue and Purple at the driver kick blue 26-pin, pin 21; or radio white 28-pin, pin 17. Speed signal, from the 2014 and 2015 to 2016 sheets. Meter it before you tap it.
Which years share wiring with the 2014 Toyota Camry?
2012, 2013, 2015, 2016 and 2017. iDatalink treats 2012 to 2017 push-start Camrys, gas and hybrid, as one chart, and the key-start sheets for 2012, 2014 and 2015 to 2016 agree on ignition.
Help build this page
Had the panels off on one of these? Show the next installer what you found.
No one has sent photos for the 2014 Toyota Camry yet, so yours could be the first. Every photo, wire color and tip we use goes on this page with your name on it, and it saves the next installer time under the dash.
1. Snap it
The plugs, tap points, fuse boxes and ground points. Phone photos are fine.
2. Send it
Tap "Add yours" at the top of this page. Your tip and your photos go in the same box.
3. See your name on it
We check every tip, then post it here "Compliments of" you, by name.
Compliments of
The installers who helped build this page.
★
Founding contributor spot: openThe first installer to confirm a wire or send photos for the 2014 Toyota Camry gets their name here, and it stays here.
★
Every tip we use gets a creditThe wire you checked is marked "Checked on a truck, compliments of" you.
Want to be famous?
Your name, right on this page, for everyone who uses it to see. Add your tip and your photos in one box.
