Serving Georgia, South Carolina & North CarolinaCall or text: 803-513-1009

Wiring Database / Nissan / Murano / 2014

2014 Nissan Murano

Midsize SUV. Push-button start (this page).

Need More Installs?

We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.

Which wires give constant, ignition and ground on a 2014 Nissan Murano?

On a 2014 Nissan Murano, take constant power from the Blue wire at the white 4-pin plug on the brake pedal switch, pin 1, ignition from the Lt.Green wire at the OBD-II port, pin 8, and ground to clean, bare body metal. Meter every wire first.

Meter every wire before you tap it. Colors change with trim and build date.

OBD-II port: Under the dash, driver sideBest power spot: Brake switch and OBD-II portSystem voltage: 12VIgnition type: Push-button (this page)

Where do I get constant, ignition and ground on a 2014 Nissan Murano?

Constant is at the brake pedal switch. Ignition is on the OBD-II port.

Option 1 All the power

Brake switch and OBD-II

White 4-pin plug at the brake pedal, OBD-II pin 8.

Constant
Blue
White 4-pin plug on the brake pedal switch, pin 112V battery feed at the brake switch.
Ignition
Lt.Green
OBD-II port, pin 8Hot with the button on.
Ground
Body ground
Bare metal under the dashNo ground wire in the guide. Never the battery negative post.
Never tap the start button wire.
Option 2 Backup

Fuse tap

If you would rather not unplug the brake switch.

Ignition
Fuse tap
Interior fuse panelBackup: a slot that is dead off and hot on.
Use an add-a-fuse.

From Fortin's install guide for the 2009 to 2014 Murano with push-button start (guide 84361).

Where are the turn signal, reverse and light wires on a 2014 Nissan Murano for advanced 360 multicam and video telematics installs?

Circuit
Wire color
Location and what it does
Left turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Right turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Park lightPositive +Not yet checked
Red
White 10-pin plug at the driver kick panel, pin 8Positive parking light. Meter it first.
HeadlightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
ReverseNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Dome lightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.

Each chip shows the main insulation color with its stripe. Source: Fortin's install guide for the 2009 to 2014 Murano with push-button start (guide 84361).

Where are the brake, door, speed and CAN wires on a 2014 Nissan Murano for advanced 360 multicam and video telematics installs?

Circuit
Wire color
Location and what it does
CAN dataDataNot yet checked
Blue (high)
Pink (low)
OBD-II port, pins 6 and 14Never cut or splice the CAN wires.
DoorsNegative -Not yet checked
Lt.Blue
Green 40-pin plug on the body control module, behind the instrument clusterDriver door. Ground when the door is open.
BrakePositive +Not yet checked
Green
White 4-pin plug on the brake pedal switch, pin 2Positive with the pedal down.
Parking brakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Vehicle speedNot foundNot yet checked
Not found
Not foundWe found no source for this wire.

Source: Fortin's install guide for the 2009 to 2014 Murano with push-button start (guide 84361). Wires marked Not found were not in the guide.

Where are the fuse boxes and ground points on a 2014 Nissan Murano?

Brake pedalWhite 4-pin plugConstant and brake.
Driver dashOBD-II portIgnition and CAN.
Ground pointsBare body metalNever the battery negative post.

Locations from Fortin's install guide.

Where is the OBD-II port on a 2014 Nissan Murano?

OBD
II
Diagnostic portOBD-II port: under the dash, driver sidePlug-in GPS trackers and OBD harnesses connect here. Check the port before you plan the install.

Which years share wiring with the 2014 Nissan Murano?

This page2014Nissan Murano.
Same wiring2009, 2010, 2011, 2012, 2013Fortin uses the same guide for these years. The brake switch pins differ on 2009.
Newer Murano2015 and newerNew body. Different wiring.
★
Help build this pageWant to be famous?Share a wire color, a photo or a tip for this vehicle, and your name goes on this page.
Add yoursClose ▾

Add yours to this page

A different wire color, a better tap point, a photo of the plug, or a trick that saved you time. It all goes in this one box.

Photos (optional, up to 6)

Nothing posts on its own. We check every tip before it goes on the page.

This page covers the 2014 Nissan Murano midsize SUV with push-button start.

The wire colors come from Fortin's install guide, read wire by wire. Our own team has not yet metered these on a 2014 Murano.

Written by API Signal, fleet GPS and camera installers for 35+ years across Georgia, South Carolina and North Carolina, installing every major telematics and camera brand. Every wire on this page lists its source.

Test every wire with a meter before you tap it

No wiring information is ever guaranteed. Colors and locations change with trim, options and build date, and the manufacturer can change them in the middle of a model year. We share this as a starting point for installers, and you are responsible for confirming every connection on the vehicle in front of you.

Common questions about 2014 Nissan Murano wiring

What wire is constant power on a 2014 Nissan Murano?

Blue at the white 4-pin plug on the brake pedal switch, pin 1. 12V battery feed at the brake switch. Meter it before you tap it.

What wire is ignition on a 2014 Nissan Murano?

Lt.Green at the OBD-II port, pin 8. Hot with the button on. Meter it before you tap it.

Where is the brake wire on a 2014 Nissan Murano?

Green (positive +) at the white 4-pin plug on the brake pedal switch, pin 2. Positive with the pedal down. Meter it before you tap it.

Which years share wiring with the 2014 Nissan Murano?

2009, 2010, 2011, 2012, 2013. Fortin uses the same guide for these years.

Help build this page

Had the panels off on one of these? Show the next installer what you found.

No one has sent photos for the 2014 Nissan Murano yet, so yours could be the first. Every photo, wire color and tip we use goes on this page with your name on it, and it saves the next installer time under the dash.

1. Snap it

The plugs, tap points, fuse boxes and ground points. Phone photos are fine.

2. Send it

Tap "Add yours" at the top of this page. Your tip and your photos go in the same box.

3. See your name on it

We check every tip, then post it here "Compliments of" you, by name.

Compliments of

The installers who helped build this page.

★
Founding contributor spot: openThe first installer to confirm a wire or send photos for the 2014 Nissan Murano gets their name here, and it stays here.
★
Every tip we use gets a creditThe wire you checked is marked "Checked on a vehicle, compliments of" you.

Want to be famous?

Your name, right on this page, for everyone who uses it to see. Add your tip and your photos in one box.

Need More Installs?

We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.

Rather have us handle it?

We install GPS, cameras and telematics across GA, SC & NC — at your yard, on your schedule.