Serving Georgia, South Carolina & North CarolinaCall or text: 803-513-1009

Wiring Database / Jeep / Wrangler / 2014

2014 Jeep Wrangler

SUV, JK body. Key start (this page).

Need More Installs?

We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.

Which wires give constant, ignition and ground on a 2014 Jeep Wrangler?

On a 2014 Jeep Wrangler, take constant power from the No color printed wire at the passenger kick panel, ignition from the Pink/White wire at the transponder (key ring) plug at the steering column, and ground to the Black wire at the transponder (key ring) plug at the steering column. Meter every wire first.

Meter every wire before you tap it. Colors change with trim and build date.

OBD-II port: Under the dash, driver sideBest power spot: Transponder plugSystem voltage: 12VIgnition type: Key start (this page)

Where do I get constant, ignition and ground on a 2014 Jeep Wrangler?

Ignition and ground are at the transponder plug on the key cylinder. Constant is in the passenger kick panel.

Option 1 Main power

Transponder plug

Small plug at the key ring, under the column cover.

Constant
No color printed
Passenger kick panelFortin taps 12V here with a 10 amp fuse. No wire color printed. Meter it.
Ignition
Pink/White
Transponder (key ring) plug at the steering columnHot with the key in run.
Ground
Black
Transponder (key ring) plug at the steering columnGround wire on the same plug. Or use bare body metal.
No starter wire is listed in this guide.
Option 2 Backup

Fuse tap

For accessory power.

Accessory
Fuse tap
Interior fuse panelNot in the guide. Find a slot that is hot only in accessory and run.
Use an add-a-fuse.

From Fortin's install guide for the 2008 to 2018 Wrangler with a key (guide 63741).

Where are the turn signal, reverse and light wires on a 2014 Jeep Wrangler for advanced 360 multicam and video telematics installs?

Circuit
Wire color
Location and what it does
Left turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Right turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Park lightPositive +Not yet checked
White/Purple
Passenger kick panel12V when the parking lights are on.
HeadlightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
ReverseNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Dome lightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.

Each chip shows the main insulation color with its stripe. Source: Fortin's install guide for the 2008 to 2018 Wrangler with a key (guide 63741).

Where are the brake, door, speed and CAN wires on a 2014 Jeep Wrangler for advanced 360 multicam and video telematics installs?

Circuit
Wire color
Location and what it does
CAN dataDataNot yet checked
White/Black (high)
White/Light Blue (low)
Transponder (key ring) plug at the steering columnNever cut or splice the CAN wires.
DoorsNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
BrakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Parking brakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Vehicle speedNot foundNot yet checked
Not found
Not foundWe found no source for this wire.

Source: Fortin's install guide for the 2008 to 2018 Wrangler with a key (guide 63741). Wires marked Not found were not in the guide.

Where are the fuse boxes and ground points on a 2014 Jeep Wrangler?

Steering columnTransponder plugIgnition, ground and CAN.
Passenger sideKick panelConstant and parking light.
Ground pointsBlack wire or body metalNever the battery negative post.

Locations from Fortin's install guide.

Where is the OBD-II port on a 2014 Jeep Wrangler?

OBD
II
Diagnostic portOBD-II port: under the dash, driver sidePlug-in GPS trackers and OBD harnesses connect here. Check the port before you plan the install.

Which years share wiring with the 2014 Jeep Wrangler?

This page2014Jeep Wrangler.
Same wiring2013, 2015, 2016, 2017, 2018Fortin uses the same guide for these years.
Not covered2018 JL and newerDifferent vehicle. Not on this page.
★
Help build this pageWant to be famous?Share a wire color, a photo or a tip for this vehicle, and your name goes on this page.
Add yoursClose ▾

Add yours to this page

A different wire color, a better tap point, a photo of the plug, or a trick that saved you time. It all goes in this one box.

Photos (optional, up to 6)

Nothing posts on its own. We check every tip before it goes on the page.

This page covers the 2014 Jeep Wrangler (JK body) with a key start.

The wire colors come from Fortin's install guide, read wire by wire. Our own team has not yet metered these on a 2014 Wrangler.

Written by API Signal, fleet GPS and camera installers for 35+ years across Georgia, South Carolina and North Carolina, installing every major telematics and camera brand. Every wire on this page lists its source.

Test every wire with a meter before you tap it

No wiring information is ever guaranteed. Colors and locations change with trim, options and build date, and the manufacturer can change them in the middle of a model year. We share this as a starting point for installers, and you are responsible for confirming every connection on the vehicle in front of you.

Common questions about 2014 Jeep Wrangler wiring

What wire is constant power on a 2014 Jeep Wrangler?

No color printed at the passenger kick panel. Fortin taps 12V here with a 10 amp fuse. Meter it before you tap it.

What wire is ignition on a 2014 Jeep Wrangler?

Pink/White at the transponder (key ring) plug at the steering column. Hot with the key in run. Meter it before you tap it.

Which years share wiring with the 2014 Jeep Wrangler?

2013, 2015, 2016, 2017, 2018. Fortin uses the same guide for these years.

Help build this page

Had the panels off on one of these? Show the next installer what you found.

No one has sent photos for the 2014 Jeep Wrangler yet, so yours could be the first. Every photo, wire color and tip we use goes on this page with your name on it, and it saves the next installer time under the dash.

1. Snap it

The plugs, tap points, fuse boxes and ground points. Phone photos are fine.

2. Send it

Tap "Add yours" at the top of this page. Your tip and your photos go in the same box.

3. See your name on it

We check every tip, then post it here "Compliments of" you, by name.

Compliments of

The installers who helped build this page.

★
Founding contributor spot: openThe first installer to confirm a wire or send photos for the 2014 Jeep Wrangler gets their name here, and it stays here.
★
Every tip we use gets a creditThe wire you checked is marked "Checked on a vehicle, compliments of" you.

Want to be famous?

Your name, right on this page, for everyone who uses it to see. Add your tip and your photos in one box.

Need More Installs?

We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.

Rather have us handle it?

We install GPS, cameras and telematics across GA, SC & NC — at your yard, on your schedule.