Serving Georgia, South Carolina & North CarolinaCall or text: 803-513-1009

Wiring Database / Ford / Ranger / 2010

2010 Ford Ranger

Compact pickup. Key start (this page).

Need More Installs?

We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.

Which wires give constant, ignition and ground on a 2010 Ford Ranger?

On a 2010 Ford Ranger, take constant power from the Red wire at the black 13-pin plug on the ignition barrel, steering column, pin 7, ignition from the White/Orange wire at the black 13-pin plug on the ignition barrel, steering column, pin 1, and ground to clean, bare body metal. Meter every wire first.

Meter every wire before you tap it. Colors change with trim and build date.

OBD-II port: Under the dash, driver sideBest power spot: Ignition barrel plugSystem voltage: 12VIgnition type: Key start (this page)

Where do I get constant, ignition and ground on a 2010 Ford Ranger?

Constant, ignition and accessory are on one plug at the ignition barrel.

Option 1 All the power

Ignition barrel plug

Black 13-pin plug on the steering column.

Constant
Red
Black 13-pin plug on the ignition barrel, steering column, pin 712V battery feed.
Ignition
White/Orange
Black 13-pin plug on the ignition barrel, steering column, pin 1Hot with the key in run.
Accessory
Brown/Yellow
Black 13-pin plug on the ignition barrel, steering column, pin 8Accessory 1. Accessory 2 is Purple/Green on pin 3.
Ground
Body ground
Bare metal under the dashNo ground wire in the guide. Never the battery negative post.
Start is Blue/White on pin 5. Never tap it.
Option 2 Backup

Fuse tap

If you would rather not open the column.

Ignition
Fuse tap
Interior fuse panelBackup: a slot that is dead off and hot on.
Use an add-a-fuse.

From Fortin's install guide for the 2007 to 2012 Ranger with a key (guide 86441).

Where are the turn signal, reverse and light wires on a 2010 Ford Ranger for advanced 360 multicam and video telematics installs?

Circuit
Wire color
Location and what it does
Left turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Right turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Park lightPositive +Not yet checked
Purple/White
Gray 10-pin plug on the parking lights switch, pin 5Positive parking light. Meter it first.
HeadlightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
ReverseNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Dome lightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.

Each chip shows the main insulation color with its stripe. Source: Fortin's install guide for the 2007 to 2012 Ranger with a key (guide 86441).

Where are the brake, door, speed and CAN wires on a 2010 Ford Ranger for advanced 360 multicam and video telematics installs?

Circuit
Wire color
Location and what it does
BrakePositive +Not yet checked
Purple/White
Orange 4-pin plug on the brake pedal switch, pin 2Positive with the pedal down. Same color as the parking light, different plug.
CAN dataNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
DoorsNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Parking brakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Vehicle speedNot foundNot yet checked
Not found
Not foundWe found no source for this wire.

Source: Fortin's install guide for the 2007 to 2012 Ranger with a key (guide 86441). Wires marked Not found were not in the guide.

Where are the fuse boxes and ground points on a 2010 Ford Ranger?

Steering columnIgnition barrel plugConstant, ignition, accessory.
Driver dashParking lights switchParking light.
Ground pointsBare body metalNever the battery negative post.

Locations from Fortin's install guide.

Where is the OBD-II port on a 2010 Ford Ranger?

OBD
II
Diagnostic portOBD-II port: under the dash, driver sidePlug-in GPS trackers and OBD harnesses connect here. Check the port before you plan the install.

Which years share wiring with the 2010 Ford Ranger?

This page2010Ford Ranger.
Same wiring2007, 2008, 2009, 2011, 2012Fortin uses the same guide for these years.
Newer Ranger2019 and newerNew truck. Different wiring.
★
Help build this pageWant to be famous?Share a wire color, a photo or a tip for this vehicle, and your name goes on this page.
Add yoursClose ▾

Add yours to this page

A different wire color, a better tap point, a photo of the plug, or a trick that saved you time. It all goes in this one box.

Photos (optional, up to 6)

Nothing posts on its own. We check every tip before it goes on the page.

This page covers the 2010 Ford Ranger compact pickup with a key start.

The wire colors come from Fortin's install guide, read wire by wire. Our own team has not yet metered these on a 2010 Ranger.

Written by API Signal, fleet GPS and camera installers for 35+ years across Georgia, South Carolina and North Carolina, installing every major telematics and camera brand. Every wire on this page lists its source.

Test every wire with a meter before you tap it

No wiring information is ever guaranteed. Colors and locations change with trim, options and build date, and the manufacturer can change them in the middle of a model year. We share this as a starting point for installers, and you are responsible for confirming every connection on the vehicle in front of you.

Common questions about 2010 Ford Ranger wiring

What wire is constant power on a 2010 Ford Ranger?

Red at the black 13-pin plug on the ignition barrel, steering column, pin 7. 12V battery feed. Meter it before you tap it.

What wire is ignition on a 2010 Ford Ranger?

White/Orange at the black 13-pin plug on the ignition barrel, steering column, pin 1. Hot with the key in run. Meter it before you tap it.

Where is the brake wire on a 2010 Ford Ranger?

Purple/White (positive +) at the orange 4-pin plug on the brake pedal switch, pin 2. Positive with the pedal down. Meter it before you tap it.

Which years share wiring with the 2010 Ford Ranger?

2007, 2008, 2009, 2011, 2012. Fortin uses the same guide for these years.

Help build this page

Had the panels off on one of these? Show the next installer what you found.

No one has sent photos for the 2010 Ford Ranger yet, so yours could be the first. Every photo, wire color and tip we use goes on this page with your name on it, and it saves the next installer time under the dash.

1. Snap it

The plugs, tap points, fuse boxes and ground points. Phone photos are fine.

2. Send it

Tap "Add yours" at the top of this page. Your tip and your photos go in the same box.

3. See your name on it

We check every tip, then post it here "Compliments of" you, by name.

Compliments of

The installers who helped build this page.

★
Founding contributor spot: openThe first installer to confirm a wire or send photos for the 2010 Ford Ranger gets their name here, and it stays here.
★
Every tip we use gets a creditThe wire you checked is marked "Checked on a vehicle, compliments of" you.

Want to be famous?

Your name, right on this page, for everyone who uses it to see. Add your tip and your photos in one box.

Need More Installs?

We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.

Rather have us handle it?

We install GPS, cameras and telematics across GA, SC & NC — at your yard, on your schedule.