Serving Georgia, South Carolina & North CarolinaCall or text: 803-513-1009

Wiring Database / Chrysler / Sebring / 2009

2009 Chrysler Sebring

Mid-size sedan. Key start (this page).

Need More Installs?

We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.

Which wires give constant, ignition and ground on a 2009 Chrysler Sebring?

On a 2009 Chrysler Sebring, take constant power from the Meter it wire at the harness at the driver kick panel, ignition from the Pink wire at the 8-pin transponder plug at the key barrel, and ground to the Black wire at the 8-pin transponder plug at the key barrel. Meter every wire first.

Meter every wire before you tap it. Colors change with trim and build date.

OBD-II port: Under the dash, driver sideBest power spot: Key barrel plugSystem voltage: 12VIgnition type: Key start (this page)

Where do I get constant, ignition and ground on a 2009 Chrysler Sebring?

Ignition and ground are on the transponder plug at the key barrel. Constant is at the driver kick panel.

Option 1 Main option

Key barrel plug

8-pin plug at the key barrel. Fortin warns it is fragile.

Constant
Meter it
Harness at the driver kick panelFortin taps 12V here but prints no color. Meter it, or use a fuse tap.
Ignition
Pink
8-pin transponder plug at the key barrelHot with the key in run.
Accessory
Not found
Not in the guideNo accessory wire is listed.
Ground
Black
8-pin transponder plug at the key barrelGround.
The same plug carries CAN data and a Purple/Brown MUX wire. Never tap them. Pins are not tied to colors, so meter.
Option 2 Constant

Fuse tap

Your easiest constant feed.

Constant
Fuse tap
Interior fuse panelA slot that is hot all the time. Fuse it.
Use an add-a-fuse.

From Fortin's install guide for the Avenger, Chrysler 200 and Sebring with a key (guide 104051).

Where are the turn signal, reverse and light wires on a 2009 Chrysler Sebring for advanced 360 multicam and video telematics installs?

Circuit
Wire color
Location and what it does
Left turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Right turnNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Park lightPositive +Not yet checked
White/Purple
Harness at the driver kick panelPositive parking light. Meter it first.
HeadlightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
ReverseNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Dome lightNot foundNot yet checked
Not found
Not foundWe found no source for this wire.

Each chip shows the main insulation color with its stripe. Source: Fortin's install guide for the Avenger, Chrysler 200 and Sebring with a key (guide 104051).

Where are the brake, door, speed and CAN wires on a 2009 Chrysler Sebring for advanced 360 multicam and video telematics installs?

Circuit
Wire color
Location and what it does
CAN dataDataNot yet checked
White/Orange (high)
White (low)
8-pin transponder plug at the key barrelData only. Never cut it or use it for power.
BrakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
DoorsNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Parking brakeNot foundNot yet checked
Not found
Not foundWe found no source for this wire.
Vehicle speedNot foundNot yet checked
Not found
Not foundWe found no source for this wire.

Source: Fortin's install guide for the Avenger, Chrysler 200 and Sebring with a key (guide 104051). Wires marked Not found were not in the guide.

Where are the fuse boxes and ground points on a 2009 Chrysler Sebring?

Steering columnKey barrel plugIgnition, ground.
Driver kick panelHarnessConstant, parking light.
Ground pointsBare body metalNever the battery negative post.

Locations from Fortin's install guide.

Where is the OBD-II port on a 2009 Chrysler Sebring?

OBD
II
Diagnostic portOBD-II port: under the dash, driver sidePlug-in GPS trackers and OBD harnesses connect here. Check the port before you plan the install.

Which years share wiring with the 2009 Chrysler Sebring?

This page2009Chrysler Sebring.
Same wiring2008, 2010Fortin uses the same guide for these years.
Same guideDodge Avenger and Chrysler 200Fortin uses one guide for both cars.
★
Help build this pageWant to be famous?Share a wire color, a photo or a tip for this vehicle, and your name goes on this page.
Add yoursClose ▾

Add yours to this page

A different wire color, a better tap point, a photo of the plug, or a trick that saved you time. It all goes in this one box.

Photos (optional, up to 6)

Nothing posts on its own. We check every tip before it goes on the page.

This page covers the 2009 Chrysler Sebring with a key start.

The wire colors come from Fortin's install guide, read wire by wire. Our own team has not yet metered these on a 2009 Sebring.

Written by API Signal, fleet GPS and camera installers for 35+ years across Georgia, South Carolina and North Carolina, installing every major telematics and camera brand. Every wire on this page lists its source.

Test every wire with a meter before you tap it

No wiring information is ever guaranteed. Colors and locations change with trim, options and build date, and the manufacturer can change them in the middle of a model year. We share this as a starting point for installers, and you are responsible for confirming every connection on the vehicle in front of you.

Common questions about 2009 Chrysler Sebring wiring

What wire is constant power on a 2009 Chrysler Sebring?

Meter it at the harness at the driver kick panel. Fortin taps 12V here but prints no color. Meter it before you tap it.

What wire is ignition on a 2009 Chrysler Sebring?

Pink at the 8-pin transponder plug at the key barrel. Hot with the key in run. Meter it before you tap it.

Which years share wiring with the 2009 Chrysler Sebring?

2008, 2010. Fortin uses the same guide for these years.

Help build this page

Had the panels off on one of these? Show the next installer what you found.

No one has sent photos for the 2009 Chrysler Sebring yet, so yours could be the first. Every photo, wire color and tip we use goes on this page with your name on it, and it saves the next installer time under the dash.

1. Snap it

The plugs, tap points, fuse boxes and ground points. Phone photos are fine.

2. Send it

Tap "Add yours" at the top of this page. Your tip and your photos go in the same box.

3. See your name on it

We check every tip, then post it here "Compliments of" you, by name.

Compliments of

The installers who helped build this page.

★
Founding contributor spot: openThe first installer to confirm a wire or send photos for the 2009 Chrysler Sebring gets their name here, and it stays here.
★
Every tip we use gets a creditThe wire you checked is marked "Checked on a vehicle, compliments of" you.

Want to be famous?

Your name, right on this page, for everyone who uses it to see. Add your tip and your photos in one box.

Need More Installs?

We send fleet installation work to independent installers. One job goes to one installer. Now adding network partners in North Carolina.

Rather have us handle it?

We install GPS, cameras and telematics across GA, SC & NC — at your yard, on your schedule.